JVC TM-H140PN
Instrukcja Obsługi

TROUBLESHOOTING
Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service centre for assistance. Problems No power supply. No picture with the power on. Points to be checked Is the power plug loosened or disconnected? Is the video signal output from the connected component? Is the input signal selected properly? Is the video cable disconnected? No sound. Is the audio signal output from the connected component? Is the volume output set to minimum? Is the audio cable disconnected? Shaking picture. No colours, wrong colour, or dark picture. Is the monitor close to a device generating a strong magnetic field? Is the colour system selected properly? Has the picture control setting (CONTRAST, BRIGHT, CHROMA or PHASE) been changed? Is the monitor close to a speaker, magnet or any other device generating a strong magnetic field? Is the aspect ratio set to 16:9? Measures (Remedy) Firmly insert the power plug. Set the connected component correctly. Select the required video signal input with the Input select button. (See page 7.) Connect the video signal cable firmly. (See pages 12 and 13.) Set the connected component correctly. Adjust the speaker volume with the VOLUME/ SELECT button. (See page 7.) Connect the audio signal cable firmly. (See pages 12 and 13.) Move the device away from the monitor until the picture stabilizes. Set COLOR SYSTEM in the <MENU> screen to AUTO. (See page 8.) Set each picture control to the standard setting. (See page 7.) Move the device away from the monitor and turn the monitor�s power off. Wait at least 30 minutes, then turn the power on again. Set ASPECT RATIO in the <MENU> screen to [4 : 3 (4 � 3)]. (See page 8.) When controlling externally, ASPECT RATIO should be set to [4 : 3 (4 � 3)]. (See pages 12 and 13.) Press the UNDER SCAN button to turn off the indicator. (See page 4.) Set CONTROL LOCK in the <SET-UP MENU> screen to OFF. (See pages 9 and 10.) Set INPUT REMOTE in the <SET-UP MENU> screen to OFF. (See pages 9 and 10.)

Unnatural, irregularly coloured, or distorted picture. Dark stripes appear at the top and bottom of the screen, picture vertically squeezed. The overall picture size is too small. Function buttons on the front panel do not function. The INPUT SELECT buttons do not function.

Has the UNDER SCAN button been pressed so the UNDER SCAN indicator lights? Has control of the buttons been locked? (Has the CONTROL LOCK function been set to ON?) Is input selection under external control? (Has the INPUT REMOTE function been set to valid (A/B)?)

The following are not malfunctions:
� When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be coloured. This is due to the structure of the cathode ray tube and will be deleted when another image is displayed. � You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static electricity on the CRT and is not harmful. � The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality appears on the screen as well. � If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to mutual interference; it is not a malfunction. Move the monitors away from each other until the interference disappears or turn the power off on any monitor that is not being used.

14