1 Press the POWER switch (or ON button of the remote
control unit) to turn the unit on.
Pressing this button alternates between Stereo mode and Mono mode.
2 Select AM or FM by pressing the corresponding button.
Stereo FM stereo broadcasts are received in stereo. The �STEREO� indicator lights on the display when an FM stereo broadcast is tuned in. < If the sound is distorted and the �STEREO� indicator light flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode. Mono To compensate for weak FM stereo reception, select this mode. Reception will now be forced monaural, reducing unwanted noise.
3 If the PRESET indicator is lit, press the TUNING MODE
button to select the manual tuning mode. The PRESET indicator disappears from the display. This button is used to change the tuning mode.
4 Select the station you want to listen to (auto selection).
Hold down the TUNING button for 0.5 to 2 seconds. When a station is found, the tuning process will stop automatically. If you want to stop the tuning process, press the TUNING button. Selecting stations which cannot be tuned automatically (manual selection) Hold down (or repeatedly press) the TUNING button and release it when the station you want to listen to is found. When the TUNING button is pressed momentarily (0.5 second or less), the frequency changes by a fixed step. < �TUNED� is displayed when a broadcast is correctly tuned in.
