WHIRLPOOL TVF15FRDW00
Instrukcja Obsługi

U S IN G YO UR F R E E Z E R

Changing the light bulb
!!!INSERT WARNING HERE!!!

(on some models)

Electrical Shock Hazard Before removing the light bulb, either turn Temperature Control to OFF and unplug the freezer, or disconnect the electricity leading to the freezer at the main power supply. Shock and injury can occur if electricity remains connected. To replace interior light: 1. Turn Temperature Control to OFF, and disconnect freezer from power supply. NOTE: Turning Temperature Control to OFF does not disconnect power to the freezer. 2. Remove the light shield by squeezing sides slightly and pulling out. 3. Replace bulb with 15-watt appliance bulb. 4. Replace light shield. Insert back tabs into slots and squeeze shield slightly to insert front tabs into slots. 5. Reconnect freezer to power supply, and refer to �Setting the temperature control� on page 7.

Light shield

Using the key eject lock
If your freezer is equipped with a lock, it can help reduce the hazard of child entrapment. To lock or unlock the freezer, you must hold the key in the lock while turning. The lock is spring loaded, so the key cannot be left in the lock. If the key is lost, contact your Estate dealer for a replacement. Always give the complete model and serial number of your freezer when requesting a replacement key.

(on some models)

10