Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 75 (kliknij aby zobaczyć)
Zone 2�Continued
Setting the Powered Zone 2
To use Zone 2, you must make this setting. It enables the speakers connected to the ZONE 2 SPEAKERS terminals so that they produce sound when Zone 2 is used.
ENTER
3
Use the Up and Down [ ]/[ ] buttons to select �g. Powered Zone 2,� and use the Left and Right [ ]/[ ] buttons to select:
1 2 2, 3 1, 4
Not Activated: Zone 2 SPEAKERS terminals deactivated. Activated: Zone 2 SPEAKERS terminals activated. When Zone 2 is activated and turned on (see page 76), the speakers connected to the ZONE 2 SPEAKERS terminals output sound, but the speakers connected to the SURROUND BACK SPEAKERS terminals do not (when Zone 2 is activated but not used, the surround back speakers work as normal).
1
RECEIVER
Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen.
4
Press the [SETUP] button. The setup menu closes.
2
ENTER
Use the Up and Down [ ]/[ ] buttons to select �0. Initial Setup,� and then press [ENTER]. The Initial Setup menu appears.
Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
