Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 60 (kliknij aby zobaczyć)
5.12
Repair tips, English
Mounting of wire for glass doors
Turn the wire pulley G clockwise until it stops. (Closed door position). Turn the wheel H in click position. Mount the wire in the wire pulley H (the end with the heavy spring). Run the wire in the second innermost groove of the wire pulley H (underneath the pulley), up around the uppermost pulleys (I, J, K and L) and down around the lowermost pulleys (M, N, and O). - Turn the pulley G anticlockwise. - Fasten the wire in the pulley H. - Mount the wire on pulley P and turn pulley G to check that everything is OK. -
Readjustment of wire
- Turn the pulley G such that the centre of the pulleys G and H is �ush with the upper edge of the tower X. - Push the wire clamping clip towards the centre and tighten (not too tight).
L I J K
