PANASONIC TYS50PX20U
Instrukcja Obsługi

Placement

STEP 1
Assembly Instructions TY-S42PX20U TY-S50PX20U Display stand
The tools required:

Plasma TV installation and fastening method

� Install the plasma TV by referring to the following illustration. � Do not hold the plasma TV at the bottom of the front panel. 1. Align the support pole insertion holes of the plasma TV with the support poles (1 each), and lower the plasma TV until the poles stop. Slightly lift the left and right sides of the plasma TV and remove the corner protection pads attached to the bottom. 2. Fasten the plasma TV and support poles using assembly screws (black screws) (� 4)
� Position by placing your hands at the points indicated in the illustration.
Lift and remove

Support pole (Left)

Corner protection pad

Plus (Phillips) (+) screwdriver

IMPORTANT
A study of the assembly instructions will not only save you time, but may prevent possible damage to your new stand. Assistance may be required for some assembly procedures. CAUTION : THIS STAND IS DESIGNED ONLY FOR USE WITH A PANASONIC PLASMA TV. APPLIED MODEL : TH-42PX20, TH-50PX20 Use with other appliances may result in instability causing possible injury. Your hardware pack contains / Replacement parts Assembly screws Glass shelf fastening screws Glass shelf support fastening screws (Black screws) ( � 4) Rear cord cover fastening screws (Black screws) ( � 3)
Support pole insertion hole

Assembly screws (Black screws) Support pole (Right)

STEP 2
�

To use with equipment such as a video deck
� Wire over the minimum distance

To thread wiring, remove the terminal cover and pass wires along the

THEA118 � 4 Support pole fastening screws

THEA102N � 8 Assembly screws (Black screws)

XST5+12 � 4 Support pole (Right)

XYN5+F55FZ � 4 Support pole (Left)

XSB4+12FZ � 7 Cord clamps

grooves in the rear cord cover, along the groves in the left and right side panels, and along the groves in the cord holder under the glass shelf. � Some equipment may have short cords. In such an instance, thread the wiring over the minimum distance, as indicated by the dotted line in the diagram. � After threading wiring, fasten with cord clamps (� 6) so that the cords do not protrude from the grooves. Finally, attach the terminal cover. If there are any cord clamps left over, store them carefully. You will need them if you use the unit to house more equipment in the future. � The top glass shelf is specifically for the center speaker and AV amp. If you place a video deck here, it may badly affect the picture.

(Back)

Cord clamps

Power cord

TBLA3196 � 1 Glass shelf supports (Right)

TBLA3197 � 1 Glass shelf supports (Left)

TBLB3111 � 6 Casters (Wheels)

REPLACEMENT PARTS LIST
TY-S42PX20U Ref. Description Qty. Part No. Top crosspiece 1 TBLA0116 Bottom panel 1 TBLH0548 Side panel (Left) 1 TBLA0104 Side panel (Right) 1 TBLA0103 Rear cord cover Glass shelf Cord holder 1 TBLB3080 1 TKGA0127 1 TBLA3184 TY-S50PX20U Part No. TBLA0117 TBLH0550 TBLA0104 TBLA0103 TBLB3110 TKGA0129 TBLA3217

TBLA3194 � 2 Replacement parts Bottom cap (Right)

TBLA3195 � 2

TBLB3074 � 4

Bottom cap (Left)

Screws

TBLB3107 � 1

TBLB3108 � 1

XTB4+10B � 4

When making a part (s) inquiry or for out of warranty purchases please quote part no. & description.
PANASONIC SERVICES COMPANY
20421 84th Avenue South, Kent, Washington 98032 Tel. : 1-800-833-9626 Fax : 1-800-237-9080 2003 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.

To maintain appearance we recommend the following:
Painted Surfaces:Use a damp cloth for cleaning. Do not use any abrasive or chemically treated cleaners. NOTE: As with all indoor furniture, this unit should not be exposed to direct sunlight, extreme temperatures or moisture, as this can result in serious irreparable damage.

Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Tel. : (905) 624-8447 2003 Matsushita Electric Industeial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.

For improvement purposes, design and specifications are subject to change without notice.

TQZH507

Printed in Japan