GRUNDIG UMS12
Instrukcja Serwisowa

Allgemeiner Teil / General Section 11 � UMS 12-S

the remote control) until the desired track appears on the display. 2 Press PLAY B on the set or remote control to start playback. � The selected track number and elapsed playing time appear on the display. Selecting a desired track during play mode 1 Press S or T ( PREV ¡ or NEXT � on the remote control) until the desired track appears on the display. � The selected track number and elapsed playing time appear on the display. � If you press S once it will skip to the beginning of the current track and play the track again.

TUNER

¯

CD

TUNER

¯

CD

TUNER

CD

SHUFFLE

Searching for a particular passage during playback
� Press and hold S or T (5 or 6 on the remote control) until the desired passage is located. � During the search, the sound is played at a faster than normal rate and at a reduced volume. � Playback returns to normal when S or T is released.

TUNER

¯

CD

SHUFFLE

TUNER

CLOCK SETTING
MULTI FUNCTIONAL DISPLAY
CD

DEMO

A TUNER

N/OFF
STAND BY

R DS

CLOCK

TIMER

ON/OFF

VOLUME

The clock will display in 24-hour mode, e.g. 00:00 or 23:59. 1 Press ON/OFF to switch on the set. 2 Press CLOCK �. � �0:00� appears and the first �0� starts flashing. 3 Set the hour with A or B. 4 Press S or T to switch to the minute mode. �:00� starts flashing. 5 Set the minute with A or B. 6 Press CLOCK � again to store the setting. � The clock starts running. Note: When a power interruption occurs, the clock setting is erased, and �0:00� will flash on the display.

Setting the clock

CD

TUNER

CD

TUNER

CD

TIMER

TUNER

¯

CD

TIMER

TUNER

¯

1 16 GRUNDIG Service
Selecting a desired track
Selecting a desired track at the stop mode 1 Press S or T ( PREV ¡ or NEXT � on
CD

CD PLAYER
Changing the display mode during playback
You can change to a different type of time display when the CD is playing. � Press (or DISPLAY on the remote control) to cycle through the various time display modes. � The display will show : Elapsed playing time of the current track �> Remaining playing time of the current track �> Remaining playing time of CD �> �

CD PLAYER
Programming Tracks
Programming tracks of a loaded CD is possible in the stop mode of the CD. The display will indicate the total tracks stored in the program. Up to 20 tracks can be stored in the memory in any order. When 20 tracks are stored and you attempt to store another track, the display will show �PROGRAM FULL�. 1 Load the desired disc in the disc tray. 2 Press S or T ( PREV ¡ or NEXT � on the remote control) to select the desired track. 3 Press PROG. to store the track. � Repeat steps 2 and 3 to store other discs and tracks. Playing the program 1 Press PLAY B on the set or remote control to start program playback. � �PROGRAM PLAY� scrolls once on the display. � The track number and elapsed playing time of the current track will appear on the display. 2 Press STOP 9 on the set on the remote control to stop program playback. Erasing the program (in the stop position) � Press STOP 9. � The last stored track is erased. � �CLEARED� appears on the display. � Press and hold STOP 9 for 2 seconds. � All the programmed tracks are erased. � �PROGRAM CLEARED� appears on the display. Note : The program is also erased when the set is disconnected from the power supply or the CD tray is opened.
CD

Shuffle
SHUFFLE � playing all the tracks in random order. It can also be used when tracks are programmed. To shuffle all the tracks 1 Press CD (SHUFFLE) (or SHUFFLE on the remote control). � �SHUFFLE� scrolls once on the display. � The SHUFFLE flag and the track selected at random appear on the display. � The tracks will now be played in random order until you press STOP 9 or until all the tracks have been played once 2 Press CD (SHUFFLE) again to resume normal playback. � The SHUFFLE flag disappears from the display.

CD

CD Synchro Start Recording
1 Load a blank cassette into the cassette deck. 2 Press TAPE (�) or SIDE on the remote control to select the play mode ( å or � ). 3 Select side A or B of the cassette. � The A or B flag appears in the display, depending on the side selected. 4 Press CD on the set or remote control to select the CD mode. 5 Load a disc into the disc tray. 6 You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, the tracks are recorded according to the selected disc. 7 Press REC 0 to start recording.
CD

TUNER

¯

CD

TUNER

TUNER

RECORD

¯

RECORD

TUNER

� �ONE TOUCH RECORDING� scrolls once on the display. � The RECORD flag appears. � The CD starts playing after a seven-second delay to prevent recording on the leader tape at the beginning of the tape. 8 Press STOP 9 to stop recording.

TIMER SETTING
Setting the Timer
� The system can switch on to TUNER, CD, TAPE or REC TU mode automatically at a preset time. It can serve as an alarm to wake you up. One hour after the preset time, the system will return to the standby mode if no button is pressed. � Before setting the timer, make sure the clock is set correctly. � The timer setting will remain active until you reset it. � The volume of the timer will be at the last setting before the set is switched to standby mode. 1 Press ON/OFF to switch on the set. 2 Press TIMER � seconds.
ON/OFF

TIMER SETTING
3a If you select REC TU... a blank tape has to be inserted into the cassette compartment. � Press PRESETA or B to select the preset station to be recorded. � Then, continue with steps 4 to 9. � 4 Press TIMER ON/OFF to confirm your selection. � � START � is displayed. � The display shows � 0:00 � and �00� flashes. 5 Press A or B to set the hour for the timer to start. 6 Press S or T to switch to the minute mode. 7 Press A or B to set the minutes for the timer to start. 8 Press TIMER � ON/OFF to store the start time.

OTHER FEATURES
Mute
This feature allows you to temporarily switch off the sound of the system without switching off the set when you require a moment of silence.
CD DBB

� Press MUTE on the remote control to switch off the sound. � �MUTE� is displayed. � Press MUTE again on the remote control to switch on the sound.

FM
TUNER

STEREO TUNED

PRESET

Sleep
This feature allows you to select a time after which the system will switch to the standby mode automatically.
CD DBB

Timer Setting

and hold for 2

� The TIMER flag flashes. 3 Press A or B to select the desired source. � TUNER, CD, TAPE or REC TU. 3a If you select TUNER... you should first select the desired waveband (MW or FM) and then press PRESETA or B to select the preset station. � Then, continue with steps 4 to 8. 3a If you select CD... track 1 will be selected and playback starts automatically at the preset time. � Continue with steps 4 to 8. 3a If you select TAPE... tape playback will start automatically at the preset time. � Continue with steps 4 to 8.

TUNER

FM

STEREO TUNED

PRESET

9 If you have selected REC TU, you should also adjust the stop time. � STOP � is displayed. � Adjust the stop time in the same way as the start time and press TIMER � ON/OFF to store the stop time. � The TIMER is now set and the TIMER flag remains lit.

¯

CD

DBB

TUNER

FM

STEREO TUNED

PRESET

� Press SLEEP on the remote control repeatedly to cycle through the sleep timer mode. � �SLEEP� and the SLEEP flag are displayed. � The timer for selection is as follows: 120 MIN �> 90 MIN �> 60 MIN �> 45 MIN �> 30 MIN �> 15 MIN �> 5 MIN �> OFF �> 120 MIN � � Select the sleep time you desire. When the sleep timer is switched on, to check the remaining time before the set switches to standby mode. � Press SLEEP once. � The remaining time will scroll through the display. To switch off the sleep timer mode. � Press SLEEP until �OFF� is displayed or press y.

CD

DBB

To stop the timer � Press TIMER � ON/OFF on the set. � The TIMER flag disappears from the display. To start the timer again � Press TIMER � ON/OFF. � The TIMER flag appears again on the display. Notes: When no button is pressed for 10 seconds, the set will automatically leave the timer setting mode.

TUNER

FM

STEREO TUNED

PRESET