Introduction
Optional recharging dock
Warning: Use the recharging dock only with the NiMH rechargeable battery pack of BCC-5. 1. Slide the battery cover off the back of the remote controller. 2. Remove the plastic AA battery tray from the battery compartment. 4. Slide the battery cover back on. After a few seconds, the remote controller starts up automatically and beeps twice to indicate that it has finished starting up. 5. Plug the power adapter into a wallet outlet and connect it to the recharging dock.
3. Insert the battery pack (included with the recharging dock) as indicated on the side of the battery pack.
6. Place the remote controller on the recharging dock. Recharging starts automatically. The light on the front of the recharging dock indicates charging takes place. When the battery pack is fully charged, the light goes off. Notes: � You can operate the remote controller while it is being charged. � Normal charging time is 2 to 3 hours, depending on the condition of the battery pack. When the battery pack is running low, the Low Battery icon blinks at the center top of the display. Recharge the batteries as soon as possible to ensure perfect performance. Note: The remote controller retains all settings when the battery pack has run out. You will only have to reset the clock.
