SHARP UX61
Instrukcja Obsługi

Loading the Document

Other restrictions
� The scanner cannot recognise yellow, greenish yellow, or light blue ink. � Ink, glue, and correcting fluid on documents must be dry before they pass
through the document feeder.

� All clips, staples, and pins must be removed from documents before loading
in the feeder. If these are not removed, they may damage the machine.

� Documents which are patched, taped, torn, smaller than the minimum size,
carbon backed, easily smudged, or have a slippery coated surface should be photocopied, and the copy loaded in the feeder.

Loading the Document
Up to 5 pages can be placed in the feeder at one time. The pages will automatically feed into the machine starting from the bottom page.

� If you need to send or copy more than 5 pages, place the additional pages
gently and carefully in the feeder just before the last page is scanned. Do not try to force them in, as this may cause double-feeding or jamming.

� If your document consists of several large or thick pages which must be
loaded one at a time, insert each page into the feeder as the previous page is being scanned. Insert gently to prevent double-feeding.

1

Adjust the document guides to the width of your document.

2

Insert the document face down in the document feeder. The top edge of the document should enter the feeder first.

� READY TO SEND will appear in the
display.

24