JVC UX-Q3BAT
Instrukcja Obsługi

6

Press or to select "ONCE" or "EVERYDAY".
ONCE : The recording timer works once. EVERYDAY: The recording timer works every day.

NOTE

� During operation, you can return to the previous step by pressing . You can quit the recording

7 8 9

Press Press TIMER".

. or to select "REC

Canceling the recording timer
In step 3 on page 23, select the timer number you want to cancel, and then press . Even when you cancel the recording timer, the setting remains stored.

� "REC" stands for "Recording".

Press

. to select a

10 Press

or sound source.

Activating the recording timer again
In step 3 on page 23, select the timer number you want to activate, and then press repeatedly until all of the setting procedure finishes. Then turn off the main unit.
NOTE

Example: To record an FM broadcast to a cassette tape

� When you want to record sound from other equipment, you cannot use the recording timer function to start playback on any equipment other than this product.

� When you want to activate two or three recording timers, leave a blank time of 2 or more minutes between the ending time of the first recording timer and the starting time of the second recording timer. If the blank time is less than 2 minutes, the second recording timer does not work. � When the power plug is disconnected or the power is cut, the recording timer settings may be lost. If the settings are lost, set the clock and recording timer again.

�When you want to record an FM/AM radio broadcast
� Press , and then press , or the number buttons to select the preset number of the radio station whose broadcast you want to record. Refer to "Using the number buttons" ( page 10).

11 Press

.

� The settings appear in the display window. Confirm the settings.

12 When the main unit is on, press
to turn off the main unit.

� While the recording timer is functioning, the volume is set to "0" and no sound is produced from the speakers or headphones. � The recording timer is available only when the main unit is turned off.

24

Convenient Functions

timer settings by pressing not stored.

. The settings are