FUNAI V3EE
Instrukcja Serwisowa

http://cxema.ru

Self-diagnosis function

This monitor equipped with a self-diagnosis function. If there is a problem with your monitor or computer, the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If 1 (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard.

MENU

RESET INPUT 1 2

1 (power) indicator

If the 1 (power) indicator is green

1 Disconnect video input cable or turn off the

connected computer.

2 Press 1 (power) button twice to turn the monitor

off and then on.

3 Move control button , for 2 seconds before the

monitor enters power saving mode.

MENU

1-7

If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cable and check the condition of your computer.

If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor�s condition.

If the 1 (power) indicator is flashing orange

Press 1 (power) button twice to turn the monitor off and then on. If 1 (power) indicator lights up green, the monitor is working properly.

If the 1 (power) indicator still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the 1 (power) indicator and inform your authorized Sony dealer of monitor�s condition. Be sure to note the model name serial number of your monitor. Also note the make and model of your computer and video board.

16