TOSHIBA V411EW
Instrukcja Obsługi

Toshiba 2-5
Tuning Your Television for the VCR
GB

Inserting Batteries in the Remote Control
GB

You must tune your television for the VCR only if you are not using a Scart cable

�
1 2 3 4 5 6 7

To view pictures from your VCR when a Scart cable is used, the television must be set to the audio/video mode (AV).

You must insert or replace the batteries in the remote control when you: x Purchase the video cassette recorder
DISPLAY VTR EJECT ON/ STANDBY

1
2

x Find that the remote control is no longer working correctly

Switch on the television. Switch on the VCR by pressing ON/STANDBY on the front of the VCR or on the remote control. Select a programme position on the television to be reserved for use with your VCR. Insert the video cassette in the VCR. Check that the VCR starts reading the cassette; if not, press PLAY (�) button.

1 4 7

2 5 8

3
CH

1 2

Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control. Insert two AAA, R03 or equivalent batteries, taking care to respect the polarities: x + on the battery with + on the remote control x � on the battery with � on the remote control Replace the cover by aligning it with the base of the remote control and pushing it back into place.

6 9

PLAY

3
4
FF

REW

Start a scan on your television or set the television to UHF channel 60. Fine tune the television until the pictures and sound are obtained clearly. If you cannot find the pictures and sound, or there is interference from nearby channels, it may be necessary to change the setting of the VCR output channel (see Solving Problems section of this manual).

CURSOR

�
PAUSE /STILL
OK
TV/VIDEO TV/VIDEO

SLOW

STOP

Do not mix different battery types (manganese and alkaline for example).

SP/ LP

VIDEO Plus+

AUDIO

Setting the Date and Time
MENU

REC

TIMER

8

When the picture and sound are perfectly clear, store this channel at the desired programme position on the television. Result: That programme is now reserved for use with your VCR.
2
REW

1
PLAY

Your VCR contains a 24-hour clock and calendar used to: x Automatically stop programme recording x Preset your VCR to record a programme automatically You must set the date and time when: x You purchase the video cassette recorder

2

CURSOR

FF

2 3

�
1 2

x Do not forget to reset the time when you change clocks from winter to summer time and vice versa. Press MENU on the remote control. Result: The programming menu is displayed. Press the corresponding �,� or ¥, � buttons to select the

SLOW

2

STOP

PAUSE /STILL

PROG

OPTIONS

INSTALL

CLOCK SET option. 3
Press the OK button to select this option. Result: The CLOCK SET menu is displayed. Press ¥ or � to select the hour, minutes, day, month and year. Result: The option selected flashes. Press the � or � buttons to increase or decrease the value. Result: The day of the week is displayed automatically.

CLOCK CLOCK

BONUS

LANG

CLOCK SET

4
� �

¥�

END: MENU

5

CLOCK

�
12:00 1/JAN/2001 MON

You can hold the � or � buttons down to scroll more quickly through the values.

6

On completion, press MENU twice to exit the menu.

Reference Information

¥�

� �

END: MENU

13

14