TOSHIBA V853UK
Instrukcja Obsługi

66

RECORDING

66

Advance Recording Feature continued
VPS/PDC Default
Programme VPS/PDC is a system of telling the VTR when a programme actually starts. Typically, when you want to record a programme you will tell the VTR to start recording, probably, five minutes before the advertised starting time of the programme and to finish ten minutes or so after the programme is due to finish. So even if the programme starts early or finishes late you will normally still get to see what you wanted to record. However when live programmes over-run or the day�s television schedule is changed from that
CH/TRK

BASIC OPERATION

Playing back
This function allows you to play back any pre-recorded cassette.

Playing a Cassette
MENU / TXT/ TV

REC

SLOW

PLAY

TIMER

1
OK

Switch on both the television and your VTR. Insert the video cassette to be played. If the safety tab on the cassette is intact, press �!PLAY or cursor ($). Otherwise, the cassette is played automatically. Note : When a cassette is loaded. the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically. NTSC tapes can be played back but cannot be recorded with this VTR.

PAUSE/STILL

REW

CURSOR

FF

2

ON/ STANDBY

VTR

TV

STOP

1
RECORDING

2 5 8 0

3 6
TV VOL
ENTER

4
I.SELECT

advertised, you may miss the desired programme which may have been delayed or even cancelled and the VTR will record the programme even if it is two or more, hours late. With VPS/PDC, you enter the exact start time and the VTR will wait until the signal is sent to confirm the programme is starting and the VTR will record the programme even if it is two or more hour late.

SP/LP

AUDIO

DISPLAY TV/VIDEO

3 1 2
Press MENU on the remote control. Result : The programming menu is displayed. Press the corresponding $, �!or �, � button to select the EASY OPERATION option.

7

9

To.. Stop the playback Eject the cassette

w

Then pres... s (STOP). (EJECT).

F. ADV

INDEX

COUNT/ TR CLR/ RST

REC

TIMER
PROG OPTIONS INSTALL

Adjusting Picture Alignment Manually
The Picture Alignment feature allows you to adjust the alignment manually to obtain the best possible picture.

SLOW

PLAY

PAUSE/STILL
OK
CLOCK

BONUS

LANG

CURSOR

EASY OPERATION

REW STOP

FF

$�!!�� OK

END: MENU

ON/ STANDBY

3 4
PROG. PROG.

Press OK button to select this option. Result : The EASY OPERATION menu is displayed. Press the corresponding $ or �!button until the PDC/VPS DEFAULT option is selected.

VTR

TV
CH/TRK

SP/ LP

AUDIO

DISPLAY TV/VIDEO

When noise bars or streaks appear during playback, adjust alignment manually by pressing the CH/TRK (i or j) buttons until the picture is clear and stable. Result : The tracking bar appears. The image is adjusted. The tracking bar disappears when you release the button. As each VTR is different, slight adjustments need to be made in the way the tape is read. This is called �Tracking�. When playback starts the video recorder automatically adjusts the Tracking to obtain the best possible picture and sound; Digital Auto Tracking. The �AUTO� indicator will flash while this adjustment takes place and the playback picture and sound may be distorted. The VTR will automatically adjust the Tracking as best it can. If you playback rented tapes or tapes recorded on other machines, you may occasionally find that the Digital Auto Tracking is not able to improve the picture sufficiently. In these instances you will need to adjust the Tracking manually. With a tape in and playing, hold down either the CH/TRK (i or j) button on the remote control until the best possible picture and sound is obtained If the tape is old or worm, it may be impossible to improve the picture performance. if you press the PAUSE/STILL button the image may shimmer. This can also be reduced by adjusting the Tracking.

1 4

2 5 8

3 6
TV VOL

A.DUB

SAT.MONI.

SAT.CONT.

BONUS

Note : VPS is the system used in main land Europe and PDC is used in UK

PDC/VPS DEFAULT VIDEOPLUS EXTEND AUTO POWER OFF REPEAT PLAY

:OFF :OFF

:OFF :OFF

7
I.SELECT

9
ENTER

$�!!!!!!�

END: MENU

5 6 46

Press � button to select ON in PDC/VPS DEFAULT option.

On completion, press MENU twice to exit the menu.

47

BASIC OPERATION

MENU / TXT/ TV