PANASONIC VDRD105
Instrukcja Obsługi

Others

Troubleshooting
Problem Sound is not played back from the built-in speaker of this unit. Although this unit is correctly connected to a TV, playback images cannot be seen. Check points � Is the volume too low? # During playback, move the volume lever to display the volume indication and adjust it. (l 54) � Have you selected video input on the TV? # Please read the operating instructions of your TV and select the channel that matches the input used for the connection. � Is the DVD-RAM or the DVD-RW (VR format) writeprotected? # Release the protection. (l 72) If the disc or the contents on the disc have been protected on another device, release the protection on the same device. � It may not be possible to delete scenes that have been divided. # Combine the divided scenes, and then delete them. (l 59) � Scenes displayed as thumbnails in shades of blue and white may not be deleted. If the scenes are unnecessary, format the disc to erase the data. (l 69) Please be aware that if a disc is formatted then all the data recorded on the disc will be erased. � Either this unit or the disc may be damaged. Please consult a dealer. � Turn off the power to this unit. If the power cannot be turned off, press the RESET button, or remove the battery or AC adaptor and then reattach it. After that, turn on the power again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from. � The unit has automatically detected an error. Press the RESET button with the projecting part of the lens cap. This will restart the unit. �PUSH THE RESET SWITCH.� is displayed. � If you do not press the RESET button, the power to this unit is turned off automatically about 1 minute later. � Even after you press the RESET button, the indication may still appear repeatedly. If so, this unit needs repair. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the appliance by yourself.

Scenes cannot be deleted or edited.

Even if a disc is formatted, it cannot be used. The indication disappears. The screen is frozen. No operation can be performed.

LSQT1040

88