Reminder: For proper operation, the vacuum generator must be mounted horizontally. Make sure to connect the discharge hose from the VacuFlush toilet to the inlet fitting of the vacuum generator. Reminder: The best system will position the vacuum generator at the same level or lower than the VacuFlush toilet. wIRING Wire the vacuum generator as shown in the wiring diagram. Use multistranded copper wire. Protect the wiring by installing grommets or other protective device at holes and sharp edges. Proper fuse or circuit breaker size is extremely important for pump and wire protection. Overfusing this pump will result in warranty invalidation.
All voltages of vacuum generators are wired in the same manner. The differences are in the required wire and fuse/breaker sizes. Run appropriate size wire from power source to vacuum switch (located on end of vacuum tank under white end cover) and attach to a �B� terminal. Run a wire from the other �B� terminal to red power wire on vacuum pump. Run a wire from the black pump wire to a grounding terminal or buss bar. Note: Do not overfuse the vacuum generator. To protect the motor, use only the fuse capacities shown on chart (see reverse side). Overfusing will void the product warranty. Electrical schematic also shows installation of optional �night switch�.
VACUUM TESTING 1. Prime pump with water before performing vacuum test. 2. POSITIVE PRESSURE TESTING IS NOT RECOMMENDED for J-series vacuum generators. The unit is designed to seal with negative pressure (vacuum), and not hold positive pressure. Dometic Corporation manufactures a complete line of sanitation products and systems. write or call the factory to receive free literature on the following products: · VacuFlush® Toilet Systems · SeaLand® brand Marine Toilet Tissue
· SaniPottie® Portable Toilets · SeaLand® Liquid and Dry Deodorant Products · SeaLand® Environment-Friendly Holding Tank
Deodorant
· SeaLand® Toilet Bowl and Seal Cleaner · SaniGard� Holding Tank Vent Filter · OdorSafe® Plus Sanitation Hose and Fittings · TankWatch® Holding Tank Level Monitors