ROLAND VG-88
Skrócona Instrukcja Obsługi

®������®

V-Guitar System Changing Tunings
The VG-88 allows you to use different tunings without actually physically retuning your guitar. Use the following procedure to change your tunings: 1. Select Preset 56�3 AcPIEZO. 2. Press GUITAR. 3. Cursor down and turn the VALUE dial to choose OPEN TUNE. 4. Press CURSOR (!) twice. 5. Press F5. 6. Turn the VALUE dial to select alternate tunings. 7. Press EXIT twice when you�re finished.

VG-88

TurboStart
EZ Edit
EZ edit allows you to change several parameters for each patch without having to navigate through their menus. Use the following procedure: 1. Select the desired patch. 2. Press EZ EDIT. 3. Use the CURSOR ($) or (!) buttons to select a parameter, and turn the VALUE dial to change the currently selected parameter�s value.

Assigning the EXPRESSION and CTL Pedals
The EXPRESSION and CTL pedals can control to a multitude of parameters. Use the following procedure to select the parameter you�d like to control using one of the pedals: 1. Press PEDAL/ASSIGN. 2. Press F5 [CTL]. 3. Turn the VALUE dial to select TUNER. 4. Cursor down to set TUNER�s minimum and maximum values. Set the minimum to Off and maximum to On since TUNER is a simple on/off switch. With parameters that provide a complete range of values�such as the master level�set your minimum to the lowest value you want to use and maximum to the highest. You�ll also want to use the EXPRESSION pedal to be able to sweep through all of the parameter�s values. 5. Press EXIT twice when you�re finished.

Chain
The VG-88 allows you to decide where in the signal chain you want to place your COSM guitar, amps and internal multi-effects. Use the following procedure to edit the chain: 1. Press NAME/CHAIN. 2. Press F5. 3. Press CURSOR (#). 4. Cursor left or right to choose the GK pickup, COSM amp or effect whose position you want to change. (Regular pickups on your guitar cannot be moved in the chain.) 5. Turn the VALUE dial to move the chosen device to another location. 6. Press EXIT twice when you�re finished.

TBS117

© 2000 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040

Faxback # 20148

Page 2