SHARP VLAH131H
Instrukcja Serwisowa

VL-A111S/H/E/AH131S/H/E VL-AH151S/E

VL-E990E

Claw C Claw B View E Claw A Claw D View F

Note: When fixing the cassette compartment lid, first engage the claws A and B, and then engage the claws C and D, confirm that the four claws (A, B, C and D) of the cassette compartment lid are securely engaged as shown in the view above. <11. Disassembly of the LCD panel>

(2)

Claw (A) (1)

Claw (A) Reflection sheet Light guide plate Diffusion sheet Prism sheet Lugs Lugs

(3)

Claw (B) Disengage the claw, and remove the LCD panel.

(C)

(2)

(4)

Arm(E)

FPC

Arm(D)

1. Disengage two claws (A), and remove the lamp inverter unit (1) from the LCD holder (2). 2. Remove the sheets from the LCD holder (2). 3. Pull the LCD glass retaining (3). 4. Remove the FPC from Arm(D) and (E). 5. Disengage the claw (B), and slide the LCD panel (4) in the (C) direction to remove the LCD holder (2). Note: When handling the prism sheet, diffusion sheet, light guide plate and reflection sheet do not touch any parts other than lugs and sides. With the light guide plate and reflection sheet between reflectors of lamp, install them together with the lamp ass'y.

8