...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 1 (kliknij aby zobaczyć)
MATSUI VP 9505
Matrix
Item See Model Book
6 6 6 Deck Exploded View ............................................................................ VXA 1105 Deck Alignment .................................................................................... VXA 1105 Deck Adjustment .................................................................................. VXA 1105
1
Head Amp Diagram
Data Input
NOTE: Before performing of each adjustments, input the data as shown in Table 1. If there is an error in the data, the unit may indicate malfunction. INSTRUCTIONS 1. Press the Power button from Power-Off on the unit while pressing the AUTO key (ATR) on the Supplied Remote Control. The Initial Set Mode indicator will appear and the Address will blink. (Refer to Fig. 1) NOTE: If the Auto Set Up Function is working, the Initial Set Mode doesn�t work. In this case, release the Function or wait until the Function goes to end. Release Method: Play back a video tape. 2. Adjust the Address with the SET + or - button of Supplied Remote Control and press the ENTER button. The Data will blink. (Refer to Table 1) 3. Adjust the Data with the SET + or - button of Supplied Remote Control and press the ENTER button. 4. Repeat the above steps 2 and 3 and input the Datas into the each Address. 5. After the Data input, turn off the Power.
