|
|
|
Kto jest w sklepie?
Sklep przegląda 6037 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Searching for tape position without the picture (wind and rewind)
a Stop the tape with the STOP h button. b Press the [ (reverse) or I (forward) button. c To stop at a certain picture, press the STOP h button.
Picture interference
When the picture quality is poor when you play a cassette, please follow these instructions.
Tracking during playback
a While a cassette is playing, hold the P q button until
Instant View
With this function you can switch to picture search during wind and rewind.
a If you hold the [ (rewind) or I (wind) button
�TRAC� (tracking) appears on the display.
b Hold the P r or P q button until the picture quality is
at its best.
c Wait a few seconds, until �TRAC� disappears from the
display. This picture setting will not change until you eject the cassette.
during wind or rewind, you will switch to picture search.
b When you release the button, the video recorder will
Tracking during still picture
If the still picture vibrates vertically, you can improve the still picture as follows:
a During still picture, hold the P q or P r button until
automatically switch back to rewind or wind.
Automatic search for a tape position (index search)
At the start of each recording, the video recorder will write an index code on the tape.
a Press the INDEX E button and then the I button to
the picture quality is at its best. The video recorder will store this setting automatically. D Please note, however, that interference may still occur with poor quality cassettes.
select the next code mark or the previous code mark.
[
button for the
Cleaning the video heads
If horizontal lines appear on the screen when you play a cassette, you should clean the video heads.
b When the video recorder finds the code mark, it will
automatically switch to play.
Automatic search for a blank space on the tape
You can search for a space on the tape (at least 1 minute of blank tape) for a new recording, for example, after an existing recording on the tape.
a Press the INDEX E button. Then press the STOP h
button.
b When the video recorder find a blank space, it will
a While a cassette is playing, hold the PLAY G button until
automatically switch to �pause�. D If no empty space has been found when the end of the tape is reached, the cassette will be ejected.
�HEAD� appears on the display. The video heads will now be cleaned. The video recorder will automatically switch to play again.
14
|
|
|
> |
|
