The on-screen menu appears. Use the buttons =P- and ;P+ to select the menu point �MANUAL SEARCH� and confirm with OK
What is an on-screen menu? The on-screen menu takes the mystery out of using your new video recorder. All settings and recording steps can be done easily via the on-screen menu by following the corresponding instructions on the screen.
MAIN MENU CLOCK AUTO INSTALL MANUAL SEARCH TV CHANNEL ALLOC. RECORD SPEED AUTO STANDBY TV SYSTEM SPECIAL SETTINGS EXITPMENU OK
PARDON?
4
Use =P- or ;P+ to select the option �DECODER� Using P or Q, activate the setting �ON�. The display will show �DEC�. When selecting �OFF� the decoder will not be allocated Confirm with OK and leave the on-screen menu with the MENU button. The screen will briefly show �STORED�
Check decoder allocation at a glance There is no need to call up the on-screen menu to check to which TV channel on the video recorder a decoder is allocated. Simply use =P- and ;P+ to select a TV channel. If �DEC� appears in the display, a decoder is allocated to this channel.
5
MANUAL SEARCH PROGRAMME NUMBER S-CHANNEL CHANNEL NUMBER DECODER QP01P NO. 21 OFF
6
EXITPMENU
STOREPOK
TIP
Using a satellite receiver
Those TV channels which are received via a satellite receiver connected (to the scart socket AV2 EXT2) can be viewed on the video recorder on programme number �E2�. Press the number button 0 on the remote control and then the button =P- to select this programme number.The TV channels of the satellite receiver are selected not on the video recorder itself, but directly on the satellite receiver.
