Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 32 (kliknij aby zobaczyć)
32 One-Touch Recording
The One-Touch Recording feature allows you to set an immediate timed recording 30 minutes to eight hours long. Before you begin: q Set up the channels at the VCR. Details are on page 12. q Select a recording speed (SP, SLP) with the SPEED button. Details are on page 36. q Put a tape in the VCR. Make sure the tape�s record tab is intact and the tape is long enough to record the program(s). q Place the VCR in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)
EJECT MENU STATUS /EXIT POWER CLEAR SMART PICTURE
1 4 7
MEMORY
2 5 8 0
3 6 9
ALT.CH
3
PAUSE /STILL
1 2 3
Press the VCR button. Press the CH(annel) o/p buttons or the Number buttons to select the channel you want to record.
2
CH.
REC /OTR
PLAY
REW
F.FWD
4
VOL.
STOP
MUTE CBL /DBS
1
VCR
TV
VCR/TV
SPEED VCR PLUS+ /ENTER
F.ADV
X2 PLAY
SLOW VAR.SLOW
Press the REC(ord)/OTR button repeatedly until the desired recording length (30 minutes to eight hours) appears on the TV screen. Recording will begin immediately. The Record light and the Timer light will appear on the VCR display panel. When the OTR finishes, the VCR shuts itself off.
OTR (0:30) CH12
TRACKING
TIME
INDEX
REC END
SKIP
SEARCH
Helpful Hints
� To check the time remaining for an OTR that is in progress, press the STATUS/EXIT button. � To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired length appears on the screen. � If you begin an OTR when another recording is paused, the OTR will begin. � You can not pause an OTR. � If the preset time for a timer recording comes up during an OTR, the OTR has priority. A message will remind you when the timer recording was scheduled to begin. You may let the OTR continue; the timer recording will not take place. Or, stop the OTR and turn off the VCR immediately. The timer recording will take place if you turn off the VCR before the timer recording�s scheduled start time. � If the end of the tape is reached during a One-Touch Recording, the VCR will eject the tape and turn itself off.
4
To stop an OTR before recording is finished, press the STOP/p button. To cancel the OTR but continue recording, press the REC(ord)/OTR button repeatedly until REC appears in the upper left corner of the TV screen. (STATUS must be ON. See page 26 for details.) The Record light will remain on the display panel of the VCR, but the Timer light will disappear.
