PHILIPS VRA651AT99
Instrukcja Obsługi

Setting Up the VCR Plus+ Programming System (cont�d) 33

2 3

Now, compare the channel numbers you have written into the VCR PLUS+ CH. and CABLE/TV CH. columns. You�ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. You must tell the VCR the VCR Plus+ and Cable/TV channel numbers according to the following steps.

2

Examine the lists on page 32.

3
CBL / DBS TV VCR VCR/TV POWER EJECT
QUICK PROGRAMMING

Press the VCR button, then press the MENU button.

4
Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press the FF :/OK button.

1
START

+ -

2
STOP

+ -

3
DATE

6-7
FF

4
DBS

5
DAILY

6
WEEKLY

7
SPEED

8 0
STILL/SLOW

9
CLEAR

5
Press the PLAY 8 or STOP 9 button to select VCR PLUS+ CH., then press the FF :/OK button.
SET VCR PLUS+ CH. VCR PLUS+ CABLE/TV 99 ��� 01 ��� 02 � � � �> ��� 03 ��� 04 ��� SELECT ,9 OR ENTER VCR+ CH. NO. THEN PUSH >/OK TO END PUSH EXIT

REW

PLAY

STOP

VOL

MENU

EXIT/STATUS

.

TIMER

6
While a VCR Plus+ channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons so that the arrow appears beside the VCR Plus+ channel number you need. Press the FF :/OK button.

SKIP SEARCH

INDEX

.

SMARTPICTURE

7

While the space for the Cable/TV channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons to enter the Cable/TV channel number from the list on page 32. Press the FF :/OK button. Repeat steps 6-7 until you have entered all the channels on your list. q If you are using a Cable Box/DBS, the Cable/TV channel will be 3 or 4 (the Cable Box/DBS output channel) for every VCR Plus+ channel. You must set the Cable Box/DBS to the channel you want to record; leave the Cable Box/DBS on for the timer recording.

8

Press the EXIT/STATUS button.

........

........

-

+

/OK

CH

4-7 3 8

AUDIO/MUTE

REC

/OTR