Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 37 (kliknij aby zobaczyć)
Setting Up the VCR Plus+ Programming System (cont�d) 37
2 3
Now, compare the channel numbers you have written into the VCR PLUS+ CH. and CABLE/TV CH. columns. You�ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. You must tell the VCR the VCR Plus+ and Cable/TV channel numbers according to the following steps.
2
Examine the lists on page 36.
3
CBL / DBS TV VCR VCR/TV POWER EJECT
QUICK PROGRAMMING
Press the VCR button, then press the MENU button.
4
Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press the FF :/OK button.
1
START
+ -
2
STOP
+ -
3
DATE
6-7
FF
4
DBS
5
DAILY
6
WEEKLY
7
SPEED
8 0
STILL/SLOW
9
CLEAR
5
Press the PLAY 8 or STOP 9 button to select VCR PLUS+ CH., then press the FF :/OK button.
SET VCR PLUS+ CH. VCR PLUS+ CABLE/TV 98 ��� 99 ��� 01 � � � �> ��� 02 ��� 03 ��� SELECT ,9 OR ENTER VCR+ CH. NO. THEN PUSH :/OK TO END PUSH EXIT
REW PLAY
+
STOP
/OK
VOL
MENU
CH
4-7 3 8
EXIT/STATUS TIMER
6
While a VCR Plus+ channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons so that the arrow appears beside the VCR Plus+ channel number you need. Press the FF :/OK button.
SMARTPICTURE
INDEX
AUDIO/MUTE
JOG/SHTL
REC
/OTR
REV
FWD
7 8
While the space for the Cable/TV channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons to enter the Cable/TV channel number from the list on page 36. Press the FF :/OK button. Repeat steps 6-7 until you have entered all the channels on your list.
