|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
The System Setup menu
08
The Input Assign menu
You only need to make this setting if you didn�t hook up your digital equipment according to the default settings for the digital inputs (see below). This setting tells the receiver what digital equipment is hooked up to which terminal so the buttons on the remote correspond to what you have hooked up. � DIG. IN default settings: COAX 1 (coaxial) � DVD COAX 2 (coaxial) � CD OPT 1 (optical) � TV
The Other setup menu
The Other menu is where you can make customized settings to reflect how you are using the receiver.
1 Select OTHER from the System Setup menu. See Making receiver settings from the System Setup menu on page 44 for more on this. 2 Use / (cursor left/right) to select the setting you want to adjust then press ENTER. If you are doing this for the first time, you may
want to adjust these settings in order: � DRC � Specify the amount of dynamic range adjustment to Dolby Digital soundtracks (see Dynamic Range Control Setup below). � DUALMONO � Isolate one channel when listening to discs with dual mono encoding (see Dual Mono Setup below). � LFE ATT � Set the attenuator level for the LFE channel (LFE Attenuator Setup below).
1 Select �IN ASSIG.� from the System Setup menu. See Making receiver settings from the System Setup menu on page 44 for more on this. 2 Select DIG. IN from the IN ASSIG. menu.
3 Select the number of the digital input to which you�ve connected your digital component. The numbers correspond with the numbers beside the inputs on the back of the receiver. 4 Select the component that corresponds with the one you connected to that input. Select DVD, TV, CD, CDR, DVR or OFF.
� Use the / (cursor up/down) buttons and ENTER to do this. � If you assign a digital input to a certain function (for example, DVD) then any digital inputs previously assigned to that function will automatically be switched off.
3 Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.
Dynamic Range Control Setup
� Default setting: OFF This setting specifies the amount of dynamic range adjustment to Dolby Digital and DTS movie soundtracks. You may want to use this when listening to surround sound at low volumes.
English Deutsch Français Italiano Nederlands Español
5
When you're finished, press RETURN.
1
Select DRC from the OTHER setup menu.
2 Use / (cursor up/down) to choose the setting that you want. � OFF � No dynamic range adjustment (use when listening at higher volume).
� MID � Mid setting.
51
En
|
|
|
> |
|
