PIONEER VSX-AX3-S/DLFXJI
Instrukcja Serwisowa

1

2

3

4

7 VSX-AX3-S, -K
All the terminals on the back panel are explained and/or referenced here.
A

B

C

1 DIGITAL OUT terminals
Use these terminals to output a digital signal to a DVD-R, CD-R, MD recorder or any other kind of digital recorder.

6 DIGITAL IN terminals
Use these terminals to input the signal from a DVD, CD player or any other kind of digital player. To be able to play Dolby Digital and other surround soundtracks you need to make digital connections. To do this use the digital terminals here. If you donít connect as per the default settings you need to complete "Assigning the Digital Inputs" .

2 CONTROL IN/OUT terminals
D

You can use these jacks to hook up other PIONEER equipment, that has a CONTROL terminal, so that you can control them all by pointing the remote control(s) at one remote sensor.

3 Radio antenna terminals
Hook up antennas for the radio tuner built into the receiver here.

7 Audio input/output terminals (connect analog components here)
Use these terminals to input/output the audio signal from analog components (like a cassette deck or turntable). These are analog jacks.

4 MONITOR OUT terminals (connect a TV or monitor here)
E

Use these terminals to output the video signal to your TV, video projector or monitor.

8 Video components input/output terminals
Input/output signals from your video components (DVD, VCR, TV tuners, SAT tuners, etc.) here.

5 PRE OUT analog terminals (connect an amplifier here)
Use these terminals to output the audio signal from this amplifier to a different amplifier if thatís how you choose to set up your system.

9 MULTI CH IN terminals
Use these terminals to input a multichannel surround signal (for example, a DVD-Audio signal) in an analog fashion. These are analog jacks.

F

182
1 2

VSX-AX5i-S
3 4