PIONEER VSX-D1011-G/NKXJI
Instrukcja Serwisowa

5

6

7

8

HI-BIT button
Use this button to switch the HI-BIT HI-SAMPLING on or off. Use to hear CD and DVD, as well as other digital soundtracks at a wider dynamic range, allowing for finer audio reproduction.

= SYSTEM OFF button
This button turns off components in two ways. First, when pressed it will turn off all PIONEER components. Secondly, any component that has programmed into the SYSTEM OFF settings will be turned off. For example: If you programmed power off in the SYSTEM OFF settings for your TV and VCR, pressing the SYSTEM OFF button will turn off these components even if they are not PIONEER products.
A

5 SYSTEM SETUP button
Use for all system setups, including the speaker and sound systems. For more information see. �Setting up for Surround Sound� starting on page 36. For a DVD player use this button to bring up the DVD menu and for a tuner use this button in the same way as the TUNER EDIT button.

~

RECEIVER (STANDBY/ON) button
Press to turn power of the receiver on or to standby (off).

6 5���2�3�ENTER buttons
These buttons can be used for a variety of operations in the SYSTEM SETUP menu. These buttons are used to control the menus for other components when in those modes (DVD, digital TV tuner, satellite tuner, cable tuner, etc.). In TUNER mode, they can select a station and/or a frequency.

! MULTI OPERATION button
Use this button to start the MULTI OPERATION mode. For how to program and use the MULTI OPERATION mode.
B

@ RECEIVER button
Use this button to switch the remote control into receiver mode in order to get certain receiver functions or do receiver setups.

7 AUDIO button
Use to switch the audio tracks of a DVD when in DVD mode.

# TOP MENU/GUIDE button
Use to find stations or menus on a digital TV tuner. For a DVD player use this button to bring up the DVD menu.

8 Command button for other components
Use these buttons to control other components you selected with the MULTI CONTROL buttons. You must input the preset code in order use this function.

$ RETURN button

When you are in a receiver setup operation this button will go back one step in the SYSTEM SETUP procedure. When you are using your DVD menu screen this button acts the same as the DVD player's "RETURN" button. When you are using cable tuners, satellite tuners or digital TV tuners this button will either exit you from the menu screen or act like a "RETURN" button above, depending on the maker of the unit.

C

9 TV CONTROL buttons
The following buttons are used to control the TV only and can be used once they are preset to control your TV.

TV INPUT: Press to select the input source for the TV. TV CH +/� : Use these buttons to change the channel of the TV. TV VOL +/� : Press to control the volume of the TV.

0 Listening mode buttons
SURROUND buttons (MOVIE, MUSIC, | \ & ENTER): MOVIE: Press to put the receiver into MOVIE listening mode. MUSIC: Press to put the receiver into MUSIC listening mode. | \: Use to select the MOVIE or MUSIC listening mode. ENTER: Use this button to enter information concerning the listening modes. STEREO/DIRECT: Switches the receiver into STEREO mode if it was in a different sound mode or toggles between DIRECT and STEREO mode. DIRECT playback bypasses the tone controls and channel level for the most accurate reproduction of a program source.

% INPUT button

Press to select an input source. The button will cycle through all the possible sources.
D

^ VOLUME (+/�) buttons
Use to raise or lower the volume of the receiver.

& MIDNIGHT button
Switches the MIDNIGHT listening mode on or off (for all modes except THX CINEMA and MULTI CH IN).

* MUTE button
Press to mute or restore the volume.

( MULTI CH INPUT button
Use this button to select the component you have hooked up to the MULTI CH IN terminals (for example, a DVD-Audio player).
E

) ACOUSTIC EQ button
Press to switch on/off and select the type of acoustic calibration EQ.

- SB CH MODE button
Use this button to turn the surround back channels ON/ OFF/AUTO or switch the VIRTUAL SURROUND BACK mode between ON/OFF/AUTO.

_ REMOTE SETUP button.
Use to customize the remote control functions and the remote control itself.

F

VSX-D2011-S
5 6 7 8

149