jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 51 (kliknij aby zobaczyć)
VSX-D607S
6. ADJUSTMENT
6.1 TUNER ADJUSTMENT
� Set the FM/AM selector to FM BAND. � Connect the wiring as shown in Fig. 6�1.
Step No. Adjustment Title Frequency (MHz) 98 Non modulation 98 98 98
ADJUSTMENT OF FM TUNER SECTION
FM SG (1kHz, ± 75kHz dev.) Level (dBµV) 80 or more Low input (0 to 30) 80 15 (± 2dB)
Reception Frequency Display �
Adjustment Location
Specifications Adjust so that the DC voltage between IC6201-pin 4 and pin 28 (or leads of C6224 and C6261) becomes 0V ± 50mV. Adjust so that the DC voltage between IC6201-pin 12 and GND (or leads of C6238 and GND) becomes at maximum level. Minimize the distortion with 1/8 rotation of the core. Adjust so that the indicator of TUNED IND. starts to light up.
1
Center Adjustment Front End Sensitivity Adjustment Stereo Distortion TUNED IND. Lighting Level
L6207 L6102 T6101 T6101 VR6201
2 3 4
98MHz 98MHz 98MHz
Notes: � Before adjusting, make sure there is no gap between L6101 and L6102 . If there is a gap between them, bring them into contact with each other first, and then make adjustments. � Make indicator adjustments in order of AM�FM.
� Set the FM/AM selector to AM BAND. � Connect the wiring as shown in Fig. 6�1.
Step No. 1 Adjustment Title TUNED IND. Lighting Level Frequency (kHz) 999 �1