|
Kto jest w sklepie?
Sklep przegląda 5778 gości
|
Kategorie
|
Informacje
|
Polecamy
|
|
|
|
|
Dla tego produktu nie napisano jeszcze recenzji!
;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Toshiba
RECORDING
RECORDING
a TV Timer Program Recording
� If you record channels, finish box set-up (pages 32 � 35), and turn on the cable box.
This section explains the basic recording operation. The programmable timer allows you record up to 6 different programs over one month.
Preparation � Select channel (3 4) or video input mode on the TV. If you record channels via box, finish cable box set-up (pages 32-35) � Make sure that the clock is set correctly (page 15). turn cable box. � Store channels on the VCR (pages 16 and 17).
®
Basic Recording
DSS satellite receiver.
®
� If you record channels, finish DSS satellite receiver set-up (pages 36 � 39), and turn on the
1 Load a cassette with the safety tab attached.
1 2 3 4 5 6
1 2 3
ProcedureProgrammingTimer
4 5 6
23 Press TV/VCR so that the �VCR� 1attached.tabsafetythewithcassetteaLoad
Select a channel to record with
0 100
REW FF
TIMER
7 8 9 S L P
indicator appears in the VCR display.
Example: To record cable channel 25 in the SP tape speed from
0 100 REC
9:30 until 10:00 p.m. on 30. Today is August 25. VCR
4 5 3
CHANNEL on the VCR, or CH/TRK ST
PLAY
2 24
H
7 8 9
PLAY TIMER
S L P
Press PROG. to display the MENU screen.
VCR REC L S
RECORDING
STOP
PROGRAM SET UP PRESET
REW FF
control. 3 Select �PROGRAM� using FF or 6
CH DATE On OFF SPD
or number buttons on the remote 10
channel number appears.
If you see �L1� or �L2� in VCR display, press I.SELECT so that the
STOP
3-8
-/--:-/--:-
REW, and press ENTER.
I.SELECT
-/--:-
-/--:-
� If you record channels via cable box, make the output -/--:-
channel number of the cable box or �L1� appear, depending on your
connection. (See pages 11 � 12.) -/--:CANCEL E n D : PROG
L P S
3
PROGRAM SET UP PRESET REC L
VCR
TIMER
4 Press SP/SLP to select the 2, 9 4speed.taperecording Move to the next using FF, and
To record from other
SP: Suitable for general recording with select the channel number 25 by CH DATE On OFF SPD better picture and sound quality. 2 5 -/--:SLP connected equipment pressing number buttons 2 and 5,
In step 3, press I.SELECT to -/--:PLAY or STOP.
-/--:-
SLP: Suitable for tripling recording time, but with less picture and
-/--:-
sound quality than using SP tape speed. -/--:switch the display as follows:
L1: To record via the LINE IN -/--:REC TIMER
Press REC on the VCR, or EnD : PROG 1 jacks on the rear panel.
TIMER
5
REC L
L2: To record via the LINE IN simultaneously press both REC on 2 jacks on the front panel. the remote control.
L P S
Recording starts. VCR � To record a program from the connected cable box:
Press STOP to stop recording. 6 STOP.
Enter the cable channel by number buttons, PLAY or If your cable box is not remote-controllable, choose the desired channel (1 to 125) on the cable box. Watching a TV program while Recording off time setting By setting off time, the recording receiver: Enter the satellite channel (100 to 999) by number �VCR� indicator. If your DSS satellite receiver is not remote-controllable, choose buttons, PLAY or STOP. (If a number 1 to 99 is entered, the VCR will record TV/CATV program on the channel, not a satellite�s.)
®
recording another � To record a program from the connected DSS satellite
®
1) While recording, press TV/VCR to turn stops and the VCR is turned off automatically.
While recording, press simultaneously both REC
2) Choose another using channel on remote repeatedly to set the desired off Each time you press REC, each half-hour up to ® desired channel (100 to 999) on the DSS satellite receiver.
TIMER Hi-Fi
selector on the TV. time.
Skipping unnecessary scenes while about 4 hours appear cyclically. recording � You can make �L1� or �L2� appear on the channel number position
by pressing I.SELECT depending on your connection.
VCR REC L SAP R
Press PAUSE/STILL to stop recording S L P STEREO (See pages 8 and 13). momentarily. To resume recording, press
Notes To make corrections:
PAUSE/STILL again. Press REW move back the item, or FF to forward.
Note � To cancel the recording in progress, press The VCR automatically shifts to stop mode if POWER on the VCR.
Reference Information
24
(Continued) recording pause mode continues for 10 minutes. 25
2-9
|
|
|
> |
|