Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
DETERGENT AND ADDITIVES
3. Close the detergent dispenser completely. Notes: � � To prevent dispensing problems when using highly concentrated washing powder, use the special detergent ball supplied with the detergent and place it inside the drum. You can use liquid detergent in the prewash phase for programmes with this special option. When using liquid detergent with the �Start delay� option, use a detergent ball for liquid detergent and place it directly in the drum. When using concentrated fabric softeners, add water in the detergent dispenser up to the �max.� level mark. In this case use only powder detergent for the main wash.
�
�
DYEING AND BLEACHING
Dyeing: commercially available products usually consist of a dye colour, fixing agent and salt. Pour the dye colour, the fixing agent and then the salt directly into the empty drum. Fill in the laundry only afterwards. � � � Use exclusively products recommended for washing machines. Follow the Manufacturer�s instructions. Plastic and rubber parts of the machine may be stained by dyes or bleaches.
SELECTING THE PROGRAMME / STARTING THE PROGRAMME
(refer also to the separate programme chart and the consumption data table) 1. Turn on the tap(s). 2. Turn the programme selector to the programme required. The pilot lamp lights up to indicate that the appliance is switched on. 3. Turn the thermostat knob to the required temperature. 4. Select options or start delay (see the next chapter) if required. 5. Keep the �Start� button pressed for one second. (if the �Start Delay� option is in use, the point after to the number of hours set flashes. Also see �Start Delay� option). 3 2
