BAUKNECHT WA 8373 W/WS-F
Instrukcja Obsługi

DETERGENT AND ADDITIVES
Notes: � You can use liquid detergent in the �Prewash� phase for programmes with this option. In this case use only powder detergents for the main wash. � If the �Start Delay� option is used, put liquid detergent into the drum with a detergent ball. � When using concentrated fabric softeners, add water in the detergent dispenser up to �MAX� level mark. � To prevent dispensing problems when using highly concentrated powder and liquid detergents, use the special detergent ball supplied with the detergent and place it inside the drum.

DYEING AND BLEACHING
Dyeing: Usual products consist of dye colour, fixing agent and salt. Pour the dye colour, the fixing agent and then the salt directly into the empty drum. Fill in the laundry only afterwards. � � � Use exclusively dyes and bleaches recommended for washing machines. Follow the Manufacturer�s instructions. Plastic and rubber parts of the machine may be stained by dyes or bleaches.

PROGRAMME SELECTION / PROGRAMME START
See also separate programme overview.
1. Set Programme Selector to the desired programme. The indicator above the �Start/ Pause� button flashes and the programme duration is shown on the display (if available). 2. Select additional options, if desired, pressing the corresponding button. The indicator for the option is lit up. N.B. An audible tone is sounded if the combination of programme and additional option does not make sense. Unsuitable combinations of additional options are deselected automatically. � By a further pressing of the button the additional option can be turned off again. � The Final Spin Speed is related to the selected programme and is shown by means of the indicator lamp. � The Final Spin Speed can be altered by pressing the �Spin� button. � In some programmes the maximum final spin speed is limited to go easy on your laundry items. Selection of a higher spin speed is not possible. � If �0� is selected, the laundry is not spun following the final rinse cycle. The water is simply pumped out. Intermediate spinning is carried out at reduced speed. 3. Press the �Start/Pause� button to start the program.

START DELAY
1. 2. (If available) Select the program and temperature, any additional options and the spin speed. Press the �Start Delay� button. The associated lamp comes on and the indicator above the �Start/Pause� button flashes. Either keep the start delay button pressed or else press it repeatedly until the desired number of hours is reached. If the maximum number of hours is reached for the delayed start, further pressing of the button starts the counter at zero again. Press the �Start/Pause� button in order to start the program. The start delay hours can be corrected even after the �Start/Pause� button has been pressed. Again here either keep the �Start Delay� button pressed or else press it repeatedly until the desired number of hours is reached. Once the display has counted down to �00� the selected programme is started. � Cancelling the start delay: If, in fact, no start delay was actually desired turn the programme selector switch and then set it to the desired position. The remaining time of the selected programme is displayed and the indicator above the �Start/Pause� button flashes. The programme can now be started immediately by pressing this button. � If the programme is changed after the start delay, the start delay option is cleared and the remaining time is displayed. The indicator above the �Start/Pause� button flashes. The programme is not started. Note: With liquid detergent, a dosing aid placed directly in the drum should be used if a start delay has been selected.

3. �

29