BLAUPUNKT WASHINGTON CM147
Instrukcja Obsługi

Installation
Recommendations
� Carefully choose the mounting location so that the unit won�t interfere with normal driving. � Avoid mounting locations where the unit would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would subject to dust, dirt or excessive vibration. � The illustration below shows a typical installation, however, you may need to adjust the installation, depending on the unit. If you have questions or need additional installation hardware, consult your Blaupunkt dealer. � Make sure the unit is firmly anchored (preferably at both front and back) and does not vibrate.

Mounting Hardware

(1) Sleeve

(2) Mounting Strap and Screw

(3) Release Keys

Mounting The Unit in Most Dashboards
1 Install the Sleeve (1) in the dashboard. 2 Select and bend the appropriate tabs to hold the sleeve firmly in place. 3 A. Attach the Mounting Strap (2) to the underside of the dashboard, using screw. B. Attach the back of the unit to the mounting strap using the support stem bolt and hardware.

Bend these tabs

Dashboard

8