Attach the ceiling panel (supplied) to the 2 hooks on the Ceiling Recessed Bracket.
Ceiling
Ceiling Panel
Camera
Removing a Ceiling Recessed Bracket
1.
Hooks (2 locations)
1. 2.
Remove the Ceiling Panel.
Pull down the Ceiling Panel and disengage the 2 hooks either side.
Dismount the camera unit from the Ceiling Recessed Bracket.
To dismount, reverse the procedures for �Attaching the Camera� in the camera�s �INSTRUCTIONS� section.
3.
Ceiling Panel
Dismount the Ceiling Recessed Bracket from the ceiling. 1 Loosen the clamping screws (3 locations) while supporting the Ceiling Recessed Bracket. Upon ensuring that the clamping bracket has been dismounted from the ceiling, lower the Ceiling Recessed Bracket until the stopper comes into contact with the ceiling.
3.
Stopper release lever
2 To remove the stopper from the ceiling, push the stopper release lever upwards using a screwdriver while supporting the Ceiling Recessed Bracket.
Stopper
3 Support the tilted Ceiling Recessed Bracket and remove
it from the ceiling.
Push Upwards
