Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 64 (kliknij aby zobaczyć)
INSTALLATION IN THE RACK
1. Remove the rubber legs (6 pcs.) on the bottom of the unit. � Use a flat-blade screwdriver and remove the screws.
Remove the rubber legs.
2. Install the rack mounting brackets on both sides of the unit. � Using the mounting screws (4 pcs.) for the rack mounting brackets, fix them firmly.
Mounting screws for rack mounting brackets (accessories)
Rack mounting brackets (accessories)
3. Install the unit in the rack. � Fix the unit firmly with the rack mounting screws (4 pcs.).
Important: � The cooling fan inside the unit is perishable and must be replaced periodically. � Do not block the ventilation openings or slots in the cover to prevent the unit from overheating. � If the rack is subject to vibration, secure the rear of the unit to the rack using additional mounting brackets (not included). � Keep the temperature in the rack below +45 °C (113 °F). � When installing, install the unit lower in the rack with a space equivalent to about 1 unit (44 mm) or more separating it from the other appliances.
