jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 9 (kliknij aby zobaczyć)
INSTALLATION
Warning! Only qualified service personnel or system installers should make all rack mountings, connections or internal settings. If adjustments are required, please refer to the Service Manual available for this product.
s Mounting in the Rack
Remove the four rubber feet by removing the four screws from the bottom of the WJ-MP204C.
Rubber feet
q Mounting One WJ-MP204C with the WV-Q204/1
1. Fix the mounting brackets (large and small) on both sides of the WJ-MP204C with the eight supplied screws (M3x8) to the WV-Q204/1.
Rack mounting bracket (small)
q Mounting two WJ-MP204Cs with the WV-Q204/2
1. Place the joint metals on the WJ-MP204Cs as shown below and fix them with the supplied screws (M3x6) to the WV-Q204/2. Note: Remove the two screws from the rear of each WJ-MP204Cs.
Rack mounting bracket (large)
Joint metal
Remove 2 screws from the rear beforehand.
Rack mounting bracket (small)
Mount screw Binding head (M3x8) Rack mounting bracket (small) Mount screw Flat head (M3x6)
2. Install the WJ-MP204Cs with the rack mounting brackets on the rack using four screws (not supplied). Cautions: � Do not block the ventilation opening or slots in the cover to prevent the appliance from overheating. Always keep the temperature in the rack within +45°C (113°F). � Secure the rear of the appliance to the rack by using additional mounting brackets (procured locally), if the rack is subject to vibration. � Do not use tapping screws for installing the WJMP204C on the rack with the rack mounting brackets.