WHIRLPOOL WU3006X6
Instrukcja Obsługi

Cycles and options (models with three buttons)

Pots & Pans cycle
A double wash with an extra rinse for maximum cleaning of cooked-on or baked-on foods. Push the POTS8t PANS Cycle Selector Button and select the mark next to POTS & PANSwith the Cycle Control Knob. HEAT DRY is automatically selected. The cycle sequence wih be: Wash+Rinse+Rinse+Rinse+Wash+ Rinse+Rinse+Rinse+Dry+Off

Light Wash cycle
A single wash for pre-rinsed or lightly soiled loads. Push a drying Selector Button and select the mark next to LIGHT WASH with the Cycle Control Knob. The cycle sequence will be:

Heat Dry selection
If the HEAT DRY Selector Button is pushed, air in the dishwasher is heated during the �dry� part of the cycle. For best drying results, use a liquid rinse agent.

Energy Saver Dry selection

Normal Wash cycle
A double wash for normal, everyday loads. (The Energy Guide Label data is based on this cycle.) Push a drying Selector Button and select the mark next to NORMAL WASH with the Cycle Control Knob. The cycle sequence will be: Wash-tRinse-tRinse-tWash-tRinse-, Rinse+Rinse+Dry+Off

Rinse+Wash+Rin.se+RinseBirise+Dry+CXf If the ENERGYSAVERDRY Selector Rinse & Hold cycle Button is pushed, air in the dishwasher is not heated. Using this option helps For rinsing a few items to be washed save energy, but dishes take longer to one or more days later. dry (overnight) and some water spotting Select the mark next to RINSE & HOLD may result. Some items (such as plastics) may need towel drying. with the Cycle Control Knob. Push the ENERGYSAVERDRY Selector Button. For best drying results, use a liquid rinse Using the Heat Dry option may cause agent. food to bake on dishes. The cycle sequence will be: Rinse+Rinse+Off

Cycles and options (models with five buttons)
Cycle selector buttons Option selector buttons Cycle conpol knob

Pots & Pans cycle
A double wash with an extra rinse for maximum cleaning of cooked-on or baked-on foods. Push the POTS& PANS Cycle Selector Button and select the mark next to POTS & PANSwith the Cycle Control Knob. The cycle sequence will be: Wash+Rinse+Rinse+Rinse+Wash+ Rinse+Rinse+Rinse+Dry-Off

Light Wash cycle
A single wash for pm-rinsed or lightly soiled loads. Push the LIGHT WASH Cycle Selector Button and select the mark next to LIGHT WASH with the Cycle Control Knob. The cycle sequence will be: RinsetWash+Rinse+RinseRinseDry+Off

Heat Dry option
If the HEAT DRY Option Selector Button is pushed, air in the dishwasher is heated during the �dry� part of the cycle. For best drying results, use a liquid rinse agent.

Energy Saver Dry option
If the ENERGYSAVERDRY Option Selector Button is pushed, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Someitems (such as plastics) may need towel drying. For best drying results, use a liquid rinse agent. Page 5

Rinse & Hold cycle
For rinsing a few items to be washed one or more days later. Select the mark next to RINSE & HOLD with the Cycle Control Knob. Push the ENERGYSAVERDRY Option Selector Button. Using the Heat Dry option may cause food to bake on dishes. The cycle sequence will be: Rmse+Rinse+Off

Normal Wash cycle
A double wash for normal, everyday loads. (The Energy Guide Label data is based on this cycle.) Push the NORMAL WASH Cycle Selector Button and select the mark next to NORMAL WASH with the Cycle Control Knob. The cycle sequence will be: Wash+Rinse+Rinse+Wash-*Rinse-* Rinse+Rinse +Dry+Off