Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
Cycles and options (Model WU565OX)
Pots & Pans cycle
A double wash where water is heated during the first wash and rinse for maximum foods. of cooked-on or baked-on cleaning
Rinse & Hold cycle
For rinsing a few items to be washed one or more days later. Select the mark next to RINSE& HOLD with the Cycle Control Knob. Push the Push the POTS& PANS Cycle Selector ENERGY SAVERDRY Option Selector Button and select the mark next to POTS Button. Using the Heat Dry option may & PANS with the Cycle Control Knob. cause food to bake on dishes. The cycle The cycle sequence will be: sequence will be: Wash+Rins.e+Rmse+Wash+Rinse+Rinse+ Rinse+Rinse+Off Rinse-+Dry+Off Energy Saver Dry option
Heavy Wash cycle
A double wash for heavily soiled loads. Push the HEAVY WASH Cycle Selector Button. Select the mark next to HEAVY WASH with the Cycle Control Knob. The cycle sequence will be: Wash-Rinse+Rinse-+Wash+~Rinse+ Rinse+Dry-+Off
Air in the dishwasher is automatically heated during the �dry� part of all cycles. If the ENERGYSAVERDRY Option Selector Button is pushed, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Someitems (such as plastics) may need towel drying. For best drying results, use a liquid rinse agent.
Normal Wash cycle
A double wash for normal, everyday loads. (The Energy Guide Label data is based on this cycle.) Push the NORMAL Cycle Selector Button and select the mark next to NORMAL WASH with the Cycle Control Knob. The cycle sequence will be: Wash+Rinse+Wash+Rinse+Rinse+ Rinse+Dry+Off
Selector Button is pushed, water is heated during the first wash in the Heavy Wash cycle and the final rinse in all cycles.
Hi-Temp Washing option When the I-II-TEMP WASHINGOption
Light Wash cycle
A single wash for pre-rinsed or lightly soiled loads. Push the LIGHT WASH Cycle Selector Button and select the mark next to LIGHT WASH and with the Cycle Control Knob. The cycle sequence will be: Rinse+Wash+inse+RRinse+Dry+Off
Using DELAY HOURS
1. Push desired Cycle Selector Button. 2. Push desired Option Selector Buttons. 3. Turn Cycle Control Knob clockwise to the number of hours you want the dishwasher to delay before the selected cycle starts. 4. Close and latch the door. NOTE: . You can add items while time is counting down. Close and latch the door. The timer will not advance if the door is unlatched. a The Light Wash cycle can not be delayed.
