Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
HOW TO INITIALIZE THE DVD PLAYER & VCR
To put the program back at the factory-default, initialize the DVD player & VCR as the following procedure.
< DVD Section >
1. Press [DVD], [1], [2], [3], [4], and [DISPLAY] buttons on the remote control unit in that order. Fig. a appears on the screen.
"*******" differs depending on the models.
MODEL : ******* Version : *.** Region : *
EEPROM CLEAR : CLEAR
EXIT: POWER
Fig. a
2. Press [CLEAR/C.RESET] button on the remote control unit. Fig. b appears on the screen.
"*******" differs depending on the models.
MODEL : ******* Version : *.** Region : * EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
EXIT: POWER
Fig. b
When �OK� appears on the screen, the factory default will be set. 3. To exit this mode, press [STANDBY-ON] button.
