PANASONIC WVQ151C
Instrukcja Obsługi

5. Mount the safety wire angle (accessory) on the 2nd anchor bolt and connect the safety wire (accessory) to the angle. q Disconnect the safety wire from the Anchor bolt Upper side safety wire angle. Mark w w Engage the face marked q with the anchor bolt. w Insert e Bend e Bend the face marked w. q Disconnect r Connect the safety wire to the safety wire angle again.
Safety wire Mark q Lower side Safety wire angle r Connect

Note: To use the anchor bolt that was already installed, the use of 2 spacer nuts is helpful.

Spacer nuts Spacer nuts
Safety wire Safety wire angle Existing anchor bolt

6. Connect the mounting base to the tip of the safety wire.

Roof space

Safety wire (Accessory)

Insert the mounting base into the hole

Mounting base

7