Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 84 (kliknij aby zobaczyć)
XDV-P9
7.1.2 DISASSEMBLY
- Removing the Upper Case (not shown) 1. Remove the eight screws. 2. Remove the upper case. - Removing the DVD/CD Mechanism Unit
DVD/CD Mechanism Unit
(Fig.1)
Remove the two screws. Remove the four dampers. Remove the two springs. Disconnect the connector and then remove the DVD/CD mechanism unit. - Removing the Grille Assy (Fig.1) Disconnect the connector Fig.1 Remove the four screws and then Remove the Grille Assy. Grille Assy
Stopper - Removing the Extension Unit (Fig.2) Remove the screw. Remove the five screws. Remove the three screws and then remove the stopper. Disconnect the connector and then remove the extension unit.
