|
|
|
Kto jest w sklepie?
Sklep przegląda 5489 gości i
17 zarejestrowanych klientów |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
08
Using the tape deck
5 Press TAPE to start playback. You can also press (remote) or (front panel) to start playback when TAPE is selected. The side of the tape you�ll hear is whichever is face up when you load it. This is the �forward� ( ) direction, while the other side is �reverse� ( ). The direction indicator is shown in the display. 6 To play the other side of the tape, press TAPE or (remote only). Each time you press TAPE ( ) during playback, the other side of the tape starts playing. Pressing TAPE ( ) when the tape is stopped starts playback on the side it was playing previously. The current tape direction is indicated in the display. 7 To skip back or forward a track on the tape, press or . On the front panel, press or (the tape should be playing when you do this). searches for the next blank space between tracks on the side currently playing (in other words, to the start of the next track), then resumes playback. searches for the previous blank space between tracks on the side currently playing (in other words, to the start of the current track), then resumes playback. By pressing or more than once, the tape will skip several tracks at once (up to a maximum of 15). For example, press twice to skip forward two tracks.
� If the recording contains frequent silences, such as a language study tape. � If the recording contains sections of very quiet material, such as some classical music recordings. 8 To pause playback, press (remote only). Press TAPE ( ) to resume playback. 9 To stop playback, press . 10 To fast wind the tape, press or . On the front panel, press or (the tape should be stopped when you do this). rewinds the tape, regardless of the tape direction at the time. always forwardwinds the tape.
Resetting the tape counter
The tape counter display indicates the current location of the tape. The tape counter returns to zero automatically when you eject a tape. To reset it manually: � Press while the tape is stopped. The counter returns to 0000.
Changing tape displays
� Press SYSTEM DISP (remote) or SYSTEM DISPLAY (front panel) repeatedly to switch between the tape displays:
Tape Counter
Track search is unlikely to work reliably in the following cases: � If the space between tracks is less than about 4 seconds. � If the recording is particularly noisy so the spaces are not recognized.
Clock
48
En
|
|
|
> |
|
