SHARP XGNV5XB
Instrukcja Serwisowa

XG-NV5XB

TROUBLE SHOOTING TABLE (Continued)
Checking the output PWB unit
Are there signal inputs at No SC1404, SC1405, SC1501 and SC1502? Are voltages applied to EA connectors and SC5502? If there is no signal at EA

No

If there is no signal at SC1501 and SC1502, go to the video system block.

If there is no signal at SC1404 and SC1405, go to "Trouble shooting table for PC I/F unit".

Yes

connectorthe power unitblock. Checking or SC5502, go to

Are there signal outputs at pins (14) ,(16) and (18) of IC1401 ?

No

Yes

Check IC1401 and their peripheral circuits.

Are there signal inputs at pin (47) of IC1101, IC1201 and IC1301?

No

Yes

Check IC1401 and their peripheral circuits.

Are there signal outputs at pins (17), (19), (21), (27), (29) and (31) of IC1101, IC1201 and IC1301?

No

Yes

Check IC1101,IC1201,IC1301 and their peripheral circuits.

Are there signal outputs at pins (17), (19), (21), (27), (29) and (31) of IC1102, IC1202 and IC1302?

No

Yes

Check IC1102,IC1202,IC1302 and their peripheral circuits.

No

If there is no signal input at pins (1) and (31) of SC1101, SC1102 and SC1103, check the switching circuit and amplifier circuit of IC1101, IC1201, IC1301, IC1102, IC1202, IC1302 and their peripheral circuits.

Are there signal inputs at SC1101, SC1201 and SC1301? Yes Yes

No

Check the R, G and B panels.

If there is no signal input at pins (15) and (30) of SC1101, SC1102 and SC1103, check IC1409 and their peripheral circuits.

Check IC1406, IC1407, IC1408 and their peripheral circuits.

36