Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
Tuner Operation
You can listen to FM and AM stations by tuning in manually, automatically, or using preset memory. For best reception, extend the headphone cord (FM antenna) for FM and turn the unit for AM.
Preset tuning
Preset the stations beforehand. (See �Presetting stations�.)
Changing the FM reception mode
When a broadcast is in stereo, �ST.� lights up and you can hear stereo effects. However, if an FM stereo broadcast is hard to receive or noisy, you can select monaural (MONO) mode. Reception improves, but you lose the stereo effect.
Manual/Auto tuning
1
Select FM or AM.
1
Select FM or AM.
FM/AM FM/AM
To select the monaural mode
�MONO� appears.
MODE/ FM MODE
(Repeatedly) (Repeatedly)
To restore the stereo mode
2 2
Select a station.
Select the preset number you want.
PRESET DOWN PRESET UP
Press MODE/FM MODE once again. �MONO� will go out.
Notes:
The following operation will also restore the stereo mode. � � � � Pressing FM/AM Pressing 4, ¢, PRESET UP, or PRESET DOWN Pressing 6 Turning off the unit
(Repeatedly) Preset number
Preset station
Presetting stations
Manual tuning
Press ¢ or 4 repeatedly to select a station you want. You can preset up to 20 FM stations (frequencies) and 10 AM stations (frequencies).
Turning off the unit
Auto tuning
Hold down ¢ or 4 for a while and then release it. The frequency automatically changes up or down to find the next station.
1 2
Select the station you want to preset.
Use Manual or Auto tuning mentioned earlier.
Press PROGRAM.
3
 
Select the preset number you want.
FM : 01~20 AM : 01~10
PRESET DOWN
