AIWA XRTC80
Instrukcja Obsługi

TIMER OPERATIONS
Sleep timer
SET TUNER/ AUX VOLUME -,+ POWER CLOCK TUNER/BAND, AUX, CDE, s f,g VOLUME+,SLEEP

Turns off the unit automatically after a specified time.
1 Press SLEEP on the remote control.
"SLEEP" is displayed.

En
DISC DIRECT PLAY 1-3 POWER 6STANDBY/ON CDE s f,g

DISC DIRECT PLAY 1-3 SET TIMER SHIFT

2 Within 6 seconds, press f or g repeatedly to set the sleep timer duration.
With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes. If there is no button input for 6 seconds, the current setting is entered automatically. The unit turns off after the selected time. To check the remaining time until the unit turns off Press SLEEP on the remote control. The remaining time is displayed for 6 seconds.

Setting the clock
1 Hold down SHIFT and press CLOCK on the remote control.
When the unit is turned off, you can also press SET.

To display the time while the power is on Hold down SHIFT and press CLOCK on the remote control. The time will be displayed for 6 seconds. To switch to the 24-hour standard Display the time and press s within 6 seconds. With each press, the clock alternates between 12- and 24hour standard time.

To cancel the sleep timer Press SLEEP on the remote control repeatedly so that "SLEEP oFF" is displayed.

2 Within 6 seconds, press f or g to set the time.
Each press changes the time in 1-minute steps. Holding these buttons down will vary the time in 10-minute units.

Tip: In the 12-hour standard, "AM12:00" indicates midnight and "PM12:00" noon.
If the clock display flashes when the unit is turned off There has been a power interruption. Reset the clock.

3 Press SET.
00 seconds.

The time display stops flashing and the clock starts from

12