Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 40 (kliknij aby zobaczyć)
8 Listening to the Radio
Tuning in stations
The tuner can receive both FM and AM broadcasts, and lets you memorize your favorite stations so you don't have to manually tune in every time you want to listen. 1 2 Press TUNER/BAND to switch to tuner mode. Press repeatedly to switch between FM and AM. Tune to a station. There are three tuning modes� step, auto, and high-speed: Step tuning: Press 1 or ¡ repeatedly to step through the frequency in either direction (front panel: � · 1/ 4 and ¢/ ¡· + ) Auto tuning: Press and hold 1 or ¡ until the frequency display starts to move, then release. The tuner will stop on the next station it finds. Repeat to search for other stations.
TUNER/BAND
STEP/SLOW
PREVIOUS
NEXT
MONO
7
SHIFT
High-speed tuning: Press and hold 1 or ¡ until the frequency display starts to move rapidly. Keep the button held down until you reach the frequency you want. If necessary, fine tune the frequency using the step tuning method. When you're tuned into a station, the tuned indicator ( If the station is FM stereo, the stereo indicator ( ) lights in the display. ) lights.
Improving poor FM reception
If you're listening to an FM station in stereo but the reception is weak, you can improve the sound quality by switching to mono: 1
TUNER/BAND MONO
Press MONO (SHIFT & 7 on the remote). The mono indicator ( ) lights when the tuner is in mono reception mode. Press again to switch back to auto-stereo mode (the stereo broadcast). indicator lights when receiving a
