9. Floor Brush. This accessory is used with wands, and is provided with a floor cloth. To attach the cloth, rest the brush on the center of cloth and then pull the cloth edges one by one under retaining springs as shown below. The slide indicator may be used to retract the center of the floor brush to expose the bristles. In this position the floor brush may be used to clean abrasive surfaces, such as garage floors, basement floors and sidewalks.
Retaining Springs
Slide Indicator
FILLING THE BOILER TANK BEFORE USE
NOTE: Before unscrewing the safety cap, always be sure that the cleaner is off and unplugged from the electrical outlet. The appliance must be unplugged from the electric outlet and allowed to cool down before all cleaning and maintenance tasks. 10. Unscrew safety cap and using funnel, pour into the tank two measuring cup (included) filled with water to the maximum level. Screw safety cap back on. (Always empty the Multi-Steamer after use to avoid overfilling.)
TURNING ON THE APPLIANCE
11. Plug the appliance into an electrical outlet. Press on/off switch. The green (power) indicator light and the amber (steam ready) indicator light will both come on. As soon as the amber (steam ready) indicator light goes out, the appliance is ready for use. Press steam delivery button to supply steam. To prevent steam from being accidentally supplied, shift back safety slider to the �� position.
CAUTION: When using the steam cleaner for the first time, keep the gun higher than cleaner body. This prevents water forming in the hose. When first using the cleaner and every time it is left unused for a few minutes, press steam delivery button and discharge any water that has formed in the hose into a container. Then, as soon as the cleaner begins supplying steam only, direct the steam jet towards the floor and press steam delivery button at least two or three times.
8
