NOTE: Taptite screws are used to secure the handle. These are thread forming screws and sufficient pressure must be applied to allow the screws to produce a thread in the plunged holes. The grill pan is designed so that you can pull it forward but it will stay supported. To remove the pan push it back as far as possible and lift it off. Replace it in reverse order. Place the grill pan on the shelf so that the pan is positioned centrally beneath the grill.
Hints and tips
� Most foods should be placed on the grid in the grill pan to allow maximum circulation of air to lift the food out of the fats and juices. � Adjust the grid to allow for different thicknesses of food. � Food should be thoroughly dried before grilling to minimise splashing. Brush lean meats and fish lightly with a little oil or melted butter to keep them moist during cooking. � Accompaniments such as tomatoes and mushrooms may be placed underneath the grid when grilling meats. � When toasting bread, use the grid in the high position. � Preheat the grill on a full setting for a few minutes before sealing steaks or toasting. Adjust the heat setting as necessary during cooking. � The food should be turned over during cooking as required.
