2. Push the appliance against the side opposite the door hinge. The appliance is fitted with 2 brackets (C) for securing it to the side of the kitchen unit; fit these as shown in the figure.
5. Separate parts A, B, C, D as shown in the figure.
A
B
A C
C D
PR266
B
D494
3. Open the door and push the appliance against the side of the kitchen furniture opposite to that of the appliance hinges. Fasten the appliance with 2 screws provided in the kit included with the appliance. Snap vent grill (D) and hinge cover (E) into position.
6. Place guide (A) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied.
50mm
A
20mm
E
PR166
D
D696
7. Fix cover (C) on guide (A) until it clips into place. 4. Apply joint the sealing strip as shown in figure. A
