Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
Tekstowy podgląd strony 28 (kliknij aby zobaczyć)
Message
Solution
Error No.
28
Error Description
During the CGMS picture (possible to record once) input. (Disc which is not for the correspondence to VR Format CPRM) Disc Protected Disc. No available recording space. Its recording capacity has been reached. (Video Format Disc) Its recording capacity has been reached. (VR Format Disc) The 999 chapter has been reached. (VR Format Disc) There is not space to record field of control information. PCA is Full. (in REC start) It is finalized. (Video Format Disc) Access to Memory Area range outside. Sector Address is wrong. BUP writing error of chapter editing. Its recording capacity has been reached.
Priority
12
This program is not allowed to Insert a ver.1.1 CPRM be recorded on this disc. compatible DVD-RW disc. This disc is protected and not recordable. Disc is full. (No area for new recording) You cannot record more than 99 titles on one disc. (The maximum is 99.) You cannot record more than 999 chapters on one disc. (The maximum is 999.) Release the disc protect setting in the Disc Setting menu. Insert the recordable disc with enough recording space.
29 30 31
7 5 7 8
Delete unnecessary titles.
32
Delete unnecessary chapter markers.
33 34
9 10
You cannot record on this disc Delete unnecessary titles. as Control Information is full. You cannot record on this disc as Power Calibration Area is Insert a new disc. full. This disc is already finalized. Release the finalizing for this disc. Repeat the same operation.
35 36 37
4 6 9
Can not record on this disc. You cannot record more than 49 titles on the disc.(The maximum is 49.)
38 39
Delete unnecessary titles.
43
You cannot record more than Delete unnecessary chapter 254 chapters on the disc.(The marks. maximum is 254.) This program is not recordable You cannot record copy in +VR mode. prohibited programs. The disc has a different menu layout. (Set �Replace Disc Menu� to ON to rewrite the menu.) Set �Replace Disc Menu� to �ON� to rewrite the menu,after that you will record to.
44 45
The 254 chapter has been reached. During the CGMS picture input. Trying to record onto the +VR formatting disc that had been recorded by the other recorder.
10 12
46
7
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error messages (error number: 1 to 39 and 43 to 46) is displayed on the recording menu after timer recording. (Once the timer programming list with error indication is displayed, the program line(s) with error will be cleared only after the programs are cancelled and reset to the timer standby mode.) (In the case of the error occurs during setting the timer programming, no error messages is displayed.)
Timer Programming MON JAN/01 1:01AM CH
Error Number
E40 JAN/01 JAN/07
12:00PM 7:00PM
1:00PM 9:00PM
L1 L2
1/1
A program with the error number is grayed out and asterisked on the timer programming list.
