4.2.8. End of the programme
When the chosen programme is over, the washing machine stops automatically and the programme selector stays on the stop « » or «rinse hold» position ( ). The programmes end : � by a spinning (for all the washing programmes) if you have not pressed the «rinse hold» pushbutton. � by a rinse hold (for all the washing programmes) if you have selected the rinse hold pushbutton. You can finish these programmes either by a spinning by releasing the rinse hold pushbutton, either by a draining, by releasing the rinse hold pushbutton, by selecting the draining program and taking care to release the on/off pushbutton before doing your choice. At the end of the cycle, allow the On/Off pushbutton to come out to switch the washing machine off. Release any other pushbuttons that are pressed in. Pull out the electricity plug and close the water supply tap. Note: we recommend that you should leave the cover and the drum open after use to air the washing drum.
