4. USING
4.1. The control panel
1 - On/Off pushbutton 2 - Cold wash pushbutton Presented model : ZWR 160 (ZWT 150 without soft opening) 3 - Rinse hold or Half load pushbutton 4 - Program selector
123
4
4.2. How to do a wash ?
Before the first wash in your washing machine, we recommend that you should do a preliminary wash at 90°C with detergent but without any washing to clean the tub.
4.2.3. Choice of the pushbuttons
Press the chosen pushbuttons.
4.2.4. «On/off» pushbutton
To switch on your appliance, press this pushbutton. The control lamp lights on.
4.2.1. Loading the washing
� � � Lift the machine cover. Open the drum by pressing on the locking button A; the two flaps automatically separate. Insert the washing, close the drum and the cover of your washing machine. Warning : before you close the cover of your washing machine, make sure that the drum door is properly closed: �the two flaps latched together, �the locking button A extended.
4.2.5. «Cold wash» pushbutton
This pushbutton is used for cold washing ; water input the drum is not heated.
4.2.5.1. «Half load» pushbutton
This pushbutton allows to wash small quantity of linen not much soiled (max. 2,5 kg) on cotton programmes only by reducing the water quantity during rinsings.
A
4.2.6. Choice of the programme
Select the programme depending on the nature and the degree of soil of the laundry. Turn the programme selector clockwise to select the chosen programme.
4.2.2. Proportioning of detergents
Your washing machine was designed to reduce water and detergent consumption, therefore reduce the doses recommended by detergent manufacturers. Put the powder detergent dose into the wash compartment and into the prewash compartment if you chose the «prewash» option. Put the softener into the compartment if you wish. If you are using a different type of detergent, refer to the «detergents and additives» section in the washing guide.
4.2.7. Starting the programme
After you choose the washing programme, press the «On/ Off» pushbutton to start the cycle.
